The new fully automatic Dryer Buddy™ TURBO Plus AUTO is here!

Dryer Buddy™ TURBO Plus AUTO is a fully automatic 2-way switcher based on the original Dryer Buddy™ Plus. It allows you to share your dryer outlet with your EVSE without having to flip any switches. Basic operation is simple, the Dryer outlet is always live and the EVSE outlet is only live when there is enough amperage available to charge your EV. When the Dryer is off it is drawing little to no amps so the EVSE outlet is switched on allowing your EV to charge. If the Dryer is turned on at any time then the EVSE outlet is switched off, when the Dryer is done, power is restored to the EVSE outlet and if your EV needs charging it will resume charging. Designed so other members of the house don't have to understand anything technical to use the Dryer when they need to do a load of laundry. Great for apartment dwellers, temp housing or an easy hookup at a friend’s/relatives house.

This Dryer Buddy is a Triple Play with one NEMA 10-30 outlet and one NEMA 14-30 on the face and a NEMA 5-20 outlet on the side. The right outlet on the Dryer Buddy is a local convenience outlet. It is a NEMA 14-30 (other outlets available by request) and is part of the EVSE circuit and works the same as the EVSE outlet on the side, but may be wired as an always-on outlet upon request or connected to the Dryer outlet sensing circuit upon request. This Triple Play outlet can have many uses.

With this Dryer Buddy you can connect a 240v compatible device that's equipped with a 120v 5-15 or 5-20 plug to your dryer outlet, it will fit into a 3-prong 10-30 outlet which is the older dryer outlet allowing you to take it on the road and plug into a friends dryer outlet.

Be sure to check the information plate on your device or check online to insure it can handle 240 volts, some factory EVSE are 240v compatible and are not labeled such as the EVSE's that come with the Chrysler Pacifica Plug-in Hybrid and the stock EVSE's included with the 2016-2018 GM Volt and GM Bolt

Example uses are:

Boost the output of the stock Tesla Gen 2 Mobile Connector included with new Tesla's to cut charge times in half without buying additional Tesla adapters. Using it's included NEMA 5-15 plug allows you to use standard extension cords if you need more reach.

Boost the output of the stock EVSE included with the new Chrysler Pacifica Plugin Hybrid Electric Vehicles (PHEV) to cut charge times in half.

Boost the output of the stock EVSE included with the 2016-2018 GM Volt and GM Bolt to cut charge times in half. Look for GM part #2427-7224 or #2428-0118 or #2428-8872 (these are just a few of the known numbers)

-Pic coming-

This unit looks similar to Dryer Buddy™ Turbo #1

See my demo video here of a similar unit: https://tinyurl.com/dbturbodemo

Note: Some high efficiency Dryers such as the Bosch Series 800 Max slowly ramp the speed of the motor and don't draw significant current (over 3.5 amps) while running, which will cause the Dryer Buddy Plus AUTO to switch the EVSE outlet off or it may switch several times in a short period. For these Dryers we recommend either the Dryer Buddy PLUS, that unit offers manual switching between outlets or adding the Delay Controller Upgrade Pak to the Dryer Buddy Plus AUTO, The delay kit solves this issue; Delay Controller Upgrade Pak. If you are using a Dryer Buddy Plus AUTO to share one outlet and charge two EV’s (no Dryer) then you will definitely need the Delay Controller Upgrade Pak.

I use a beautiful 4 color kWh meter to display important information. This keeps track of how much Energy you are using so you know how much $ in electricity you’ve used, by simple multiplying the value by your utilities rate (0.13/kWh here in Vegas). The meter is wired to read system Voltage and only meter the Current flowing through the EVSE outlet, unlike the EasySplit 220™ unit where the meter reads all Current flowing through the unit. In this configuration the Kilowatt Hours (kWh's) will only accumulate for Energy flowing through the EVSE outlet (on the right of the face) this value is stored between power outages and may be reset when you like. This allows you to see only the Energy your Electric vehicle has consumed.

Dryer Buddy vs. Dryer Buddy PLUS vs. Dryer Buddy Plus AUTO

The original Dryer Buddy model is a splitter (both outlets always live), You can add one of two Upgrade Paks for manual or automatic operation, an Upgrade Pak essential allows you to pay the difference in cost between the original Dryer Buddy and the Dryer Buddy Plus AUTO or Dryer Buddy PLUS AUTO.

What is a Dryer Buddy Plus? The Dryer Buddy Plus is a manual 2-way switcher based on the original Dryer Buddy. It allows you to share your Dryer outlet with your EVSE or any appliance like a Bitcoin miner. Only one outlet is live at a time, by default it’s the dryer outlet (on the left) with a flip of the switch, power is toggled to the EVSE outlet only. Designed so other members of the house don’t accidentally start the Dryer while you’re charging your EV;

The Dryer Buddy Plus AUTO is a fully automatic 2-way switcher based on the original Dryer Buddy Plus It allows you to share your Dryer outlet with your EVSE without having to flip any switches. Basic operation is simple, the Dryer outlet is always live and the EVSE outlet is only live when there is enough amperage available to charge your EV. When the Dryer is off it is drawing little to no amps so the EVSE outlet is switched on allowing your EV to charge. If the Dryer is turned on at any time then the EVSE outlet is switched off, when the Dryer is done, power is restored to the EVSE outlet and if your EV needs charging it will resume charging. Designed so other members of the house don't have to understand anything technical to use the Dryer when they need to do a load of laundry, See my demo video here:  Dryer Buddy Plus AUTO with kWh meter Demo

For the PLUS and Plus Auto models the meter is wired to read system Voltage and only meter the Current flowing through the EVSE outlet, unlike the original Dryer Buddy where the meter reads all Current flowing through the unit. In this configuration the Kilowatt Hours (kWh's) will only accumulate for Energy flowing through the EVSE outlet (on the right of the face) this value is stored between power outages and may be reset when you like. This allows you to see only the Energy your Electric vehicle has consumed.

Need some extra length between your Dryer outlet and Dryer Buddy™ or between the Dryer Buddy™ and your Electric Vehicle Charging Station (EVSE)? I custom build extension cords to the length your need and with the plug and outlet of your choice, see my extensions in the Adapter’s section for several models; Extension Cords