This is an Order Upgrade Pak for pending 50amp Electric Range Buddy's, Welder Buddy's and RV Buddy orders of any number. It upgrades the order with an external whip so that in addition to the front facing two outlets there is a 50amp whip exiting the bottom of the unit to be hardwired directly into your Tesla Wall Connector or other wall mounted EVSE. This whip is on the same circuit as the EVSE outlet on the Buddy. The cable may exit the back or any side upon request. This flexibility allows you to mount an EVSE on the opposite side of the wall for a clean install, this is commonly done when the laundry room and garage share a wall. The right outlet on the Buddy is now a local convenience outlet. (other outlets available by request) and is part of the EVSE circuit and works the same as the remote EVSE outlet, but may be wired as an always-on outlet upon request or connected to the Dryer outlet sensing circuit upon request. This spare outlet can have many uses. This Upgrade Pak is not for existing Buddy's that are already built.

You must have a Buddy on order FIRST or in your cart before adding this Upgrade Pak, purchasing this upgrade doesn't include a Buddy, it is an Upgrade Pak as titled.

If this Upgrade Pak is ordered after 2 business days (M-F) from the original order you must contact BSA Electronics first to see if your original order qualifies as it may be to far along into the build process.

The pic shown is of a -TBD- and is only for illustration purposes to show the Hardwire whip. Your unit will have the outlets and meter as you order it. It will come in the rectangular Polycarbonate case seen on the Buddy's product page.

Features:

• Left outlet stays the same (master)
  
• Right outlet stays the same (EVSE switched circuit)
  
• Adds a Heavy Duty 6ga. 50amp Black rubber whip (captive, doesn't disconnect from Buddy box) also wired to EVSE circuit
• Whip is secured with a standard cable clamp not a cable gland due to large size