NEW hardwired 30amp Power Spy™ now available!
Posted by Brad Apelgren on
The 30A Power Spy™ Hardwired Power Monitor allows you to add and monitor a 30amp outlet's energy usage. Now you can see exactly how much your electric vehicle charging equipment, or anything else equipped with a 30amp 240volt plug is using for power. The beautiful four color meter tells you instantly what your line voltage is, your amperage draw is, your wattage draw is, and it even accumulates kilowatt-hours (kWh's). You can multiply the kilowatt-hours by your local electrical rate to see how many dollars and cents it cost to run your particular device. We pay approximately $0.125 per kWh here in Las Vegas. The total is accumulated until you press the recessed reset button. The total is even held during power outages. This is a great solution to monitor the cost of operating any appliance. This unit is built with heavy duty terminal blocks for the power input capable of accepting up to 4 gauge wire and one side mounted outlet of your choice. The bottom of the case has a standard hole to accept 3/4" sized conduit nipples and cord grips. Pics are for example and are of the 50amp version, also available, this 30amp unit is wired with 10 gauge instead of the 6 gauge shown.
Share this post
0 comment